Project Description

BB/BD
Full Cone Nozzle

www.pnr.eu
[email protected]
+39 0383 344611

BB BD FULL CONE NOZZLE – X VANE, SQUARE SPRAY PATTERN, THREE-PIECE DESIGN, EASY CLEAN

BB BD full cone nozzle offers a three-piece design made of body, X-vane and connection. BB/BD series nozzles supply a square section spray pattern and are suitable for working environments that strictly require a uniform coverage. The most important feature of BB BD full cone nozzle is their X-vane which can be easily disassembled. It is mounted between its body and connection, allowing the narrowest passage to avoid clogging. The best choice to solve clogging problems.
BB/BD series nozzles produce a square spray pattern. The flat spray orientation is set with a 10°-15° offset angle from the main manifold axis to avoid jet overlapping. Therefore the correct alignment of these nozzles is very important and must be done properly. Please refer to the table below.

Materials
AISI 303 s.s.
AISI 316L s.s.
Brass (opt.)

Thread specification
Male BSPT, NPT

Female BSP, NPT
From 1/8″ to 1/2″

PNR Italia 27058 Voghera (PV) Italy – Via Gandini 2
Phone: +39 0383 344611 Fax: +39 0383 212489 E-mail: [email protected]

BB/BD

FULL CONE NOZZLE

Materials

AISI 303 s.s.
AISI 316L s.s.
Brass (opt.)

More materials on request

Thread specification

Male BSPT, NPT
Female BSP, NPT

From 1/8″ to 1/2″

BB/BD

FULL CONE NOZZLE

Materials

AISI 303 s.s.
AISI 316L s.s.
Brass (optional)
More materials on request

Thread specification

Male BSPT, NPT
Female BSP, NPT

From 1/8″ to 1/2″

BB / BD

FULL CONE NOZZLE

Materials

AISI 303 s.s.
AISI 316L s.s.
Brass (optional)
More materials on request

Thread specification

Male BSPT, NPT
Female BSP, NPT

From 1/8″ to 1/2″

BB BD FULL CONE NOZZLE – X VANE, SQUARE SPRAY PATTERN, THREE-PIECE DESIGN, EASY CLEAN

BB BD full cone nozzle offers a three-piece design made of body, X-vane and connection. BB/BD series nozzles supply a square section spray pattern and are suitable for working environments that strictly require a uniform coverage. The most important feature of BB BD full cone nozzle is their X-vane which can be easily disassembled. It is mounted between its body and connection, allowing the narrowest passage to avoid clogging. The best choice to solve clogging problems.

BB/BD series nozzles produce a square spray pattern. The flat spray orientation is set with a 10°-15° offset angle from the main manifold axis to avoid jet overlapping. Therefore the correct alignment of these nozzles is very important and must be done properly. Please refer to the table below.

CLJet deflection angledegDULiquid outlet diammRFFemale threadinch
DConventional orifice diammFFFlange outer diammRGMale threadinch
D1Smallest free inside diammGFlange center-hole diammSQSquare bar sizemm
DELiquid inlet diammH,H1HeightmmWWeightgr, kg
DFFlange sizeinchL,L1LengthmmWSWrench sizemm
DIAOutside diametermmNRNumber of orifices
DNFlange nominal sizemmQCQuickfit connection

+39 0383 344611