Project Description

HT/QM

MINI QUICK-FIT FLAT FAN NOZZLE

Materials

PP, chemically bonded fiberglass

Connection

Quick-fit with ZHS nipple (1/8″, 1/4″, 3/8″ BSPT)

HT/QM

MINI QUICK-FIT FLAT FAN NOZZLE

Materials

PP, chemically bonded fiberglass

Connection

Quick-fit with ZHS nipple (1/8″, 1/4″, 3/8″ BSPT)

HT/QM

MINI QUICK-FIT FLAT FAN NOZZLE

Materials

PP, chemically bonded fiberglass

Connection

Quick-fit with ZHS nipple (1/8″, 1/4″, 3/8″ BSPT)

HT/QM MINI QUICK-FIT FLAT FAN NOZZLES

HT/QM mini quick-fit flat fan nozzles, assembled onto a nipple with 1/8”, 1/4″ e 3/8” BSPT connections, offer the convenience of a quick coupling which allows a simple assembly. Moreover, the special seal between nipple and nozzle avoids any risk of leakage. To allow a perfect spray pattern alignment, the spray jet has an offset angle of 10° from the hexagon of the nipple onto which the nozzle is assembled. This type of nozzles are extremely convenient for maintenance and can be quickly replaced in case of clogging. The various flow rates of these nozzles are marked by different colours. They are made in glass fibre-reinforced PP to ensure maximum stability at high temperatures and chemical resistance.

CLJet deflection angledegDULiquid outlet diammRFFemale threadinch
DConventional orifice diammFFFlange outer diammRGMale threadinch
D1Smallest free inside diammGFlange center-hole diammSQSquare bar sizemm
DELiquid inlet diammH,H1HeightmmWWeightgr, kg
DFFlange sizeinchL,L1LengthmmWSWrench sizemm
DIAOutside diametermmNRNumber of orifices
DNFlange nominal sizemmQCQuickfit connection

+39 0383 344611

HT/QM
Mini Quick-Fit Flat Fan Nozzle

www.pnr.eu
[email protected]
+39 0383 344611

HT/QM MINI QUICK-FIT FLAT FAN NOZZLES

HT/QM mini quick-fit flat fan nozzles, assembled onto a nipple with 1/8”, 1/4″ e 3/8” BSPT connections, offer the convenience of a quick coupling which allows a simple assembly. Moreover, the special seal between nipple and nozzle avoids any risk of leakage. To allow a perfect spray pattern alignment, the spray jet has an offset angle of 10° from the hexagon of the nipple onto which the nozzle is assembled. This type of nozzles are extremely convenient for maintenance and can be quickly replaced in case of clogging. The various flow rates of these nozzles are marked by different colours. They are made in glass fibre-reinforced PP to ensure maximum stability at high temperatures and chemical resistance.

Materials
PP, chemically bonded fiberglass

Connection
Quick-fit with ZHS nipple (1/8″, 1/4″, 3/8″ BSPT)

PNR Italia 27058 Voghera (PV) Italy – Via Gandini 2
Phone: +39 0383 344611 Fax: +39 0383 212489 E-mail: [email protected]