Project Description

ZPH

DISK NOZZLE PIPE CLAMP

Materials

Clamp: PP, chemically bonded fiberglass
Pin, bolt: AISI 316L s.s.

Max working pressure

7 bar

Max working temperature

80 °C

Fitting dimensions

Outer pipe d.: 50 mm
Inner pipe d.: 47 mm
Feed hole: 19 mm

ZPH

DISK NOZZLE PIPE CLAMP

Materials

Clamp: PP, chemically bonded fiberglass
Pin, bolt: AISI 316L s.s.

Max working pressure

7 bar

Max working temperature

80 °C

Fitting dimensions

Outer pipe diameter: 50 mm
Inner pipe diameter: 47 mm
Feed hole: 19 mm

ZPH

DISK NOZZLE PIPE CLAMP

Materials

Clamp: PP, chemically bonded fiberglass
Pin, bolt: AISI 316L s.s.

Max working pressure

7 bar

Max working temperature

80 °C

Fitting dimensions

Outer pipe diameter: 50 mm
Inner pipe diameter: 47 mm
Feed hole: 19 mm

DISK NOZZLE PIPE CLAMP

ZPH pipe clamps are specially designed for the quick and easy instalment of disc nozzles onto pipes. These clamps are very convenient as there’s no need to buy expensive metal tips or welded nozzle tips. You must drill a 19 mm diameter hole on the pipe, insert the clamp into it and fix it with screws.  Their design, which allows to position the disc nozzles with a 5° offset angle, assures a proper jet orientation. These clamps avoid spray jets interference and are ideal for nozzles cleaning steel brushes.

AEAir capacity, inletNcm/minHEHeightmmRARadiusmm
AUAir flow, outletNcm/minLFHose lenghtmRFFemale threadinch
CCartridge ident colorLPMax operating pressurebarRFSInlet thread steaminch
CAInternal volumeliterLQMax capacitylpmRFWInlet thread waterinch
DEDepthmmLTMax operation temperature°CRGMale threadinch
DINipple inner dia (hose reels)mmMWire net mesh sizemeshSThicknessmm
D,D1DiametermmMFFlexible hose sizeinchSVSwivel base model
DXNipple inner diametermmPDepthmmUOutlet thread sizeinch
EInlet thread sizeinchPDPipe external diametermmUFOutlet fem thread sizeinch
FFFlange nominal diainchPSPipe sizeinchWWeightkg
H,H1HeightmmQCapacitylpmWFWater inletinch
  WSWrench sizemm

+39 0383 344611

Lateral view

Bottom view

ZPH
Pipe Clamps

www.pnr.eu
[email protected]
+39 0383 344611

DISK NOZZLE PIPE CLAMP

ZPH pipe clamps are specially designed for the quick and easy instalment of disc nozzles onto pipes. These clamps are very convenient as there’s no need to buy expensive metal tips or welded nozzle tips. You must drill a 19 mm diameter hole on the pipe, insert the clamp into it and fix it with screws.  Their design, which allows to position the disc nozzles with a 5° offset angle, assures a proper jet orientation. These clamps avoid spray jets interference and are ideal for nozzles cleaning steel brushes.

Materials
Clamp:
PP, chemically bonded fiberglass
Pin, bolt:
AISI 316L s.s.

Fitting dimensions
Outer pipe d.: 50 mm
Inner pipe d.: 47 mm
Feed hole: 19 mm

Max working pressure
7 bar

Max working temperature
80 °C

PNR Italia 27058 Voghera (PV) Italy – Via Gandini 2
Phone: +39 0383 344611 Fax: +39 0383 212489 E-mail: [email protected]