Project Description
ZPQ
SWIVEL NOZZLE CAM AND LEVER CLAMP
Materials
Body: PP, chemically bonded fiberglass
Pin, bolt: AISI 316L s.s.
O-ring: NBR
Seal: PP soft
Max working pressure
5 bar
Max working temperature
80 °C
Pipe size
1-1/4″
1-1/2″
ZPQ
SWIVEL NOZZLE CAM AND LEVER CLAMP
Materials
Body: PP, chemically bonded fiberglass
Pin, bolt: AISI 316L s.s.
O-ring: NBR
Seal: soft PP
Max working pressure
5 bar
Max working temperature
80 °C
Pipe size
1-1/4″
1-1/2″
ZPQ
SWIVEL NOZZLE CAM AND LEVER CLAMP
Materials
Body: PP, chemically bonded fiberglass
Pin, bolt: AISI 316L s.s.
O-ring: NBR
Seal: soft PP
Max working pressure
5 bar
Max working temperature
80 °C
Pipe size
1-1/4″
1-1/2″
SWIVEL NOZZLE CAM AND LEVER CLAMPS
ZPQ cam and lever clamps are specially designed for HGQ, RGN and ZBA ball nozzles. Only three steps to install them on a pipe: drill a hole, wrap the cam around the pipe and pull the lever down to block it. No need of tools. The body is in PP chemically bonded fibreglass whereas accessorial bolts and screws are made in stainless steel AISI 316. ZPQ swivel nozzles with cam and lever clamps provide excellent performance at high temperatures and easy spray jet orientation.
| AE | Air capacity, inlet | Ncm/min | HE | Height | mm | RA | Radius | mm |
| AU | Air flow, outlet | Ncm/min | LF | Hose lenght | m | RF | Female thread | inch |
| C | Cartridge ident color | — | LP | Max operating pressure | bar | RFS | Inlet thread steam | inch |
| CA | Internal volume | liter | LQ | Max capacity | lpm | RFW | Inlet thread water | inch |
| DE | Depth | mm | LT | Max operation temperature | °C | RG | Male thread | inch |
| DI | Nipple inner dia (hose reels) | mm | M | Wire net mesh size | mesh | S | Thickness | mm |
| D,D1 | Diameter | mm | MF | Flexible hose size | inch | SV | Swivel base model | — |
| DX | Nipple inner diameter | mm | P | Depth | mm | U | Outlet thread size | inch |
| E | Inlet thread size | inch | PD | Pipe external diameter | mm | UF | Outlet fem thread size | inch |
| FF | Flange nominal dia | inch | PS | Pipe size | inch | W | Weight | kg |
| H,H1 | Height | mm | Q | Capacity | lpm | WF | Water inlet | inch |
| WS | Wrench size | mm |
+39 0383 344611
SWIVEL NOZZLE CAM AND LEVER CLAMPS
ZPQ cam and lever clamps are specially designed for HGQ, RGN and ZBA ball nozzles. Only three steps to install them on a pipe: drill a hole, wrap the cam around the pipe and pull the lever down to block it. No need of tools. The body is in PP chemically bonded fibreglass whereas accessorial bolts and screws are made in stainless steel AISI 316. ZPQ swivel nozzles with cam and lever clamps provide excellent performance at high temperatures and easy spray jet orientation.
Materials
Body:
PP, chemically bonded fiberglass
Pin, bolt:
AISI 316L s.s.
O-ring:
NBR
Seal:
soft PP
Max working pressure
5 bar
Max working temperature
80 °C
Pipe size
1-1/4″ or 1-1/2″
PNR Italia 27058 Voghera (PV) Italy – Via Gandini 2
Phone: +39 0383 344611 Fax: +39 0383 212489 E-mail: [email protected]