Close this search box.



The UMV series washgun has been designed primarily to avoid hot water waste while ensuring comfortable operation conditions. Its thick rubber casing not only effectively protects the operator’s hand from the discomfort of hot water but also assures excellent protection in case the washgun is dropped or falls to the ground since it avoids any damage to the tiles or the equipment. The careful design, mainly used for the food industry, also includes a grease- and detergent-resistant quality rubber, plus a blue colour chosen as a visual aid to be seen clearly against a white or clear foreground. The trigger is lined, too, and can be held in the open position using a lock ring. The spray pattern can be adjusted continuously from a closed straight jet to a wide-angle spray so that the proper pattern can be chosen for each job.

The versatility of this wash gun is enhanced by the additional model UMV 2211 xx, which can be fitted with nozzles or different lances through its 1/2” male thread. The three different lance models shown are easily fitted to the gun body with a 1/2” male nipple and offer the following choices of operation:
1 | Foaming machines and equipment prior to washing operations. The foam lance has a quick-connect female coupling, and a matching coupling must be fitted at the gun outlet.
2 | General purpose 1/4” female thread outlet, 1/4” male thread inlet. It is available with a heat protection sleeve or zinc-plated steel. The general purpose is for Lance to need a connection nipple 1/4” female to 1/2” female to be fitted on the gun.



Body: Brass casting chrome plated
Lining: EPDM
Stem: AISI 316 s.s.
Trigger: AISI 316 s.s.

Flow rate

21 l/min (UMV 2210)

61 l/min (UMV 2211)

Max working temperature

95 °C

Max working pressure

24 bar




Code Feature
UMV 2210 xx Standard, adjustable jet
UMV 2211 xx With 1/2″ male quick thread, without lance
UMV 220A xx With foam lance
UMV 220B xx With 1/4″ female outlet, bare lance
UMV 220C xx With 1/4″ female outlet, heat-protected lance

Please note that codes ending with double x (xx) must be completed with the material’s code, substituting the (xx) for the code T2 for chrome-plated brass or B31 for AISI 316L.



XUM V001 B2 Foam lance, AISI 304
XUM V002 B1 Quick-connected coupling for foam lance, 1/2” F, AISI 303
XUM V003 B2 Universal lance, 1/4″ F out, heat protection, AISI 304
XUM V004 B2 Universal lance, 1/4″ F out, AISI 304
XUM V005 xx Nipple, 1/4″ F x 1/2″ F

Please note that codes ending with double x (xx) must be completed with the material’s code, substituting the (xx) for the code T8 for chrome-plated brass or B31 for AISI 316L.

Do you have questions about a product
or do you need personal advice?

Download area

UMV drawing in 2D (PDF)
UMV drawing in 3D (STEP)
Download Datasheet (PDF)

To download this content, you have to authenticate.

AE Air capacity, inlet Ncm/min HE Height mm RA Radius mm
AU Air flow, outlet Ncm/min LF Hose lenght m RF Female thread inch
C Cartridge ident color LP Max operating pressure bar RFS Inlet thread steam inch
CA Internal volume liter LQ Max capacity lpm RFW Inlet thread water inch
DE Depth mm LT Max operation temperature °C RG Male thread inch
DI Nipple inner dia (hose reels) mm M Wire net mesh size mesh S Thickness mm
D,D1 Diameter mm MF Flexible hose size inch SV Swivel base model
DX Nipple inner diameter mm P Depth mm U Outlet thread size inch
E Inlet thread size inch PD Pipe external diameter mm UF Outlet fem thread size inch
FF Flange nominal dia inch PS Pipe size inch W Weight kg
H,H1 Height mm Q Capacity lpm WF Water inlet inch
    WS Wrench size mm

Richiedi informazioni

Compila il form e inviacelo.
Un nostro specialista riceverà la tua richiesta e ti risponderà al più presto.
Ricordiamo che l’utente ha la facoltà di rinunciare a queste opzioni in qualunque momento.

* Campo obbligatorio

Request information

Fill out the form and send it to us.
One of our specialists will receive your request and respond to you as soon as possible
We remind you that you have the right to opt out of these options at any time.

* Mandatory field