Project Description
AT
Full Cone Nozzle
www.pnr.eu
info@pnr.it
+39 0383 344611
AT FULL CONE NOZZLE – VANELESS, OFF LINE
AT full cone nozzle produces a high and strong rotation of the liquid. There’s no vane inside the whirl chamber which has free internal passages and for this reason these nozzles are less prone to clogging. Moreover, a specially designed tip placed at the bottom of these nozzles increases their atomizing effect. The design of AT nozzles allows a uniform spray distribution and increases their operating life by 20%.
Materials
AISI 303 s.s.
AISI 316L s.s.
Brass
Thread specification
Male BSPT
Male NPT (opt)
From 1/8″ to 1″
PNR Italia 27058 Voghera (PV) Italy – Via Gandini 2
Phone: +39 0383 344611 Fax: +39 0383 212489 E-mail: info@pnr.it
AT
FULL CONE NOZZLE
Flow Rate
Materials
AISI 303 s.s.
AISI 316L s.s.
Brass
Thread specification
Male BSPT
Male NPT (opt.)
From 1/8″ to 1″
AT
FULL CONE NOZZLE
Flow Rate
Materials
AISI 303 s.s.
AISI 316L s.s.
Brass
More materials on request
Thread specification
Male BSPT
Male NPT (optional)
From 1/8″ to 1″
AT
FULL CONE NOZZLE
Flow Rate
Materials
AISI 303 s.s.
AISI 316L s.s.
Brass
More materials on request
Thread specification
Male BSPT
Male NPT (optional)
From 1/8″ to 1″
AT FULL CONE NOZZLE – VANELESS, OFF LINE
AT full cone nozzle produces a high and strong rotation of the liquid. There’s no vane inside the whirl chamber which has free internal passages and for this reason these nozzles are less prone to clogging. Moreover, a specially designed tip placed at the bottom of these nozzles increases their atomizing effect. The design of AT nozzles allows a uniform spray distribution and increases their operating life by 20%.
| CL | Jet deflection angle | deg | DU | Liquid outlet dia | mm | RF | Female thread | inch |
| D | Conventional orifice dia | mm | FF | Flange outer dia | mm | RG | Male thread | inch |
| D1 | Smallest free inside dia | mm | G | Flange center-hole dia | mm | SQ | Square bar size | mm |
| DE | Liquid inlet dia | mm | H,H1 | Height | mm | W | Weight | gr, kg |
| DF | Flange size | inch | L,L1 | Length | mm | WS | Wrench size | mm |
| DIA | Outside diameter | mm | NR | Number of orifices | – | |||
| DN | Flange nominal size | mm | QC | Quickfit connection | – |
