Project Description
HT
FLAT FAN NOZZLE
Flow Rate
Materials
AISI 303 s.s.
AISI 316L s.s.
Brass
Thread specification
Bayonet coupling
From 1/8″ to 1/2″
HT
FLAT FAN NOZZLE
Flow Rate
Materials
AISI 303 s.s.
AISI 316L s.s.
Brass
Thread specification
Bayonet coupling
From 1/8″ to 1/2″
HT
FLAT FAN NOZZLE
Flow Rate
Materials
AISI 303 s.s.
AISI 316L s.s.
Brass
Thread specification
Bayonet coupling
From 1/8″ to 1/2″
HT FLAT FAN NOZZLE – BAYONET COUPLING
The HT flat fan nozzle offers the same quality and technical characteristics of the standard types but also the additional convenience of a bayonet coupling which allows a simple assembly with no need of tools and an automatic spray pattern alignment. The optimum performance of your system or machine is then conveniently safeguarded, with a noticeable reduction in service cost and production loss for system downtime.
HT series are widely applied to working environments that are easy to clog. HT flat fan nozzle is available with standard capacity (Q1) and large capacity (Q2).
| GROUPS | CONNECTION TYPE |
| Low capacity | Q0, Q1 |
| Standard capacity | Q1, QA |
| Large capacity | Q2, QB |
| CL | Jet deflection angle | deg | DU | Liquid outlet dia | mm | RF | Female thread | inch |
| D | Conventional orifice dia | mm | FF | Flange outer dia | mm | RG | Male thread | inch |
| D1 | Smallest free inside dia | mm | G | Flange center-hole dia | mm | SQ | Square bar size | mm |
| DE | Liquid inlet dia | mm | H,H1 | Height | mm | W | Weight | gr, kg |
| DF | Flange size | inch | L,L1 | Length | mm | WS | Wrench size | mm |
| DIA | Outside diameter | mm | NR | Number of orifices | – | |||
| DN | Flange nominal size | mm | QC | Quickfit connection | – |
Q0
Q1
Q2
QA
QB