Project Description
RW/RX/RZ
HOLLOW CONE NOZZLE
Flow Rate
Materials
AISI 303 s.s.
AISI 316L s.s.
Brass
Thread specification
RX: 1/4″ M BSPT, NPT
RZ: 1/4″ M BSP, NPT
RW: welding nipple + locknut
RW/RX/RZ
HOLLOW CONE NOZZLE
Flow Rate
Materials
AISI 303 s.s.
AISI 316L s.s.
Brass
Thread specification
RX: 1/4″ Male BSPT, NPT
RZ: 1/4″ Male BSP, NPT
RW: welding nipple + locknut
RW / RX / RZ
HOLLOW CONE NOZZLE
Flow Rate
Materials
AISI 303 s.s.
AISI 316L s.s.
Brass
Thread specification
RX: 1/4″ Male BSPT, NPT
RZ: 1/4″ Male BSP, NPT
RW: welding nipple + locknut
RW RX RZ HOLLOW CONE NOZZLE – HYDRAULIC ATOMIZERS
RW RX RZ hollow cone nozzle delivers a very finely atomized hollow cone spray, even at low pressure values. They contain a precisely machined insert with narrow passages that can be easily disassembled for cleaning in case of obstruction. Clogging can be avoided placing a fine mesh strainer on the main manifold or using an individual filter, such as VEF (with RZ hydraulic nozzle).
RW hydraulic atomizers works in the same way, but the tip is locked with a welded nipple ZAA and a locknut VAA. The capacities of RW tip are the same of RX nozzle.
| CL | Jet deflection angle | deg | DU | Liquid outlet dia | mm | RF | Female thread | inch |
| D | Conventional orifice dia | mm | FF | Flange outer dia | mm | RG | Male thread | inch |
| D1 | Smallest free inside dia | mm | G | Flange center-hole dia | mm | SQ | Square bar size | mm |
| DE | Liquid inlet dia | mm | H,H1 | Height | mm | W | Weight | gr, kg |
| DF | Flange size | inch | L,L1 | Length | mm | WS | Wrench size | mm |
| DIA | Outside diameter | mm | NR | Number of orifices | – | |||
| DN | Flange nominal size | mm | QC | Quickfit connection | – |
RX (in liters per hour)
RW (in liters per hour)
RZ (in liters per minute)
RX (in gallons per hour)
RW (in gallons per hour)
RZ (in gallons per minute)
RX
RW
RZ (+ VEF)
RW / RX / RZ
Hollow Cone Nozzle
www.pnr.eu
info@pnr.it
+39 0383 344611
RW RX RZ HOLLOW CONE NOZZLE – HYDRAULIC ATOMIZERS
RW RX RZ hollow cone nozzle delivers a very finely atomized hollow cone spray, even at low pressure values. They contain a precisely machined insert with narrow passages that can be easily disassembled for cleaning in case of obstruction. Clogging can be avoided placing a fine mesh strainer on the main manifold or using an individual filter, such as VEF (with RZ hydraulic nozzle). RW hydraulic atomizers works in the same way, but the tip is locked with a welded nipple ZAA and a locknut VAA. The capacities of RW tip are the same of RX nozzle.
Materials
AISI 303 s.s.
AISI 316L s.s.
Brass
Thread specification
RX: 1/4″ M BSPT, NPT
RZ: 1/4″ M BSP, NPT
RW: Welded nipple + locknut
RX (in liters per hour)
RW (in liters per hour)
RZ (in liters per minute)
PNR Italia 27058 Voghera (PV) Italy – Via Gandini 2
Phone: +39 0383 344611 Fax: +39 0383 212489 E-mail: info@pnr.it