UK
TANK WASHER

Flow rate
Materials
AISI 316L s.s., EPDM, TEFLON/PEEK
Connection
Support structure welded to the tank / Head structure fixed with tri-clamp connection
UK
TANK WASHER

Flow rate
Materials
AISI 316L s.s., EPDM, TEFLON/PEEK
Connection
Support structure welded to the tank.
Head structure fixed with tri-clamp connection.
UK
TANK WASHER

Flow rate
Materials
AISI 316L s.s., EPDM, TEFLON/PEEK
Connection
Support structure welded to the tank.
Head structure fixed with tri-clamp connection.
UKD / UKR
Our new UK tank washer is a revolution in retractor design, as it offers at the same time greater efficiency, extreme flexibility and an easier operation capability.
We put aside the bulky stainless-steel construction and operate our washing head via a pneumatic drive or CNC. Hence the following advantages:
- the total impact of the water jet is concentrated on the circumference of one or two hollow cone sprays, moving into the tank instead of being inefficiently dispersed over the entire internal surface;
- the alternating movement of the washer covers the total inner surface of the tank and allows what was previously impossible, such as cleaning the opposite sides of an internal mixing blade;
- having control of cylinder movement, we can program short cycles concentrated over difficult points as many times as necessary;
- our standard double hollow cone head has a capacity of 100 lpm at 3 bar, but customized designs can be studied, according to customer requirements.
Of course, you can use our new UK retractor as a standard one, which is installing on it a rotating head from our UBD series.
CL | Jet deflection angle | deg | DU | Liquid outlet dia | mm | RF | Female thread | inch |
D | Conventional orifice dia | mm | FF | Flange outer dia | mm | RG | Male thread | inch |
D1 | Smallest free inside dia | mm | G | Flange center-hole dia | mm | SQ | Square bar size | mm |
DE | Liquid inlet dia | mm | H,H1 | Height | mm | W | Weight | gr, kg |
DF | Flange size | inch | L,L1 | Length | mm | WS | Wrench size | mm |
DIA | Outside diameter | mm | NR | Number of orifices | - | |||
DN | Flange nominal size | mm | QC | Quickfit connection | - |
WASHING HEAD You can also use our new UKD retractor as a standard one, which is installing on it a rotating head from our UBD series. | ![]() |
CONNECTION We provide a support structure welded to the tank: the head structure is fixed with tri-clamp connection. | ![]() |
WASHING HEADS All impact on the hollow cone spray edge travelling continuously, back and forth. Inner surface swept all the time. | ![]() |
DIFFICULT SPOT You can keep the washing head repeating the cycle 2-3-2-3 as many times as required. | ![]() |
MIXING BLADES | ![]() |