Project Description

VED

CHECK-VALVE FILTER

Materials

Body:
AISI 303 s.s., AISI 316L s.s., Brass, Nylon
Wire net:
AISI 304 s.s.

Mesh number

50 mesh
80 mesh
100 mesh

VED

CHECK-VALVE FILTER

Materials

Body:
AISI 303 s.s., AISI 316L s.s., Brass, Nylon
Wire net:
AISI 304 s.s.

Mesh number

50 mesh
80 mesh
100 mesh

VED

CHECK-VALVE FILTER

Materials

Body:
AISI 303 s.s., AISI 316L s.s., Brass, Nylon
Wire net:
AISI 304 s.s.

Mesh number

50 mesh
80 mesh
100 mesh

VED – CHECK-VALVE FILTERS

VED series check-valve filters are specially designed for 3/8″ flanged nozzles. VED filters contain a one-way ball valve to avoid dripping when spray is turned off. They also serve to protect the nozzle tips. We recommend to assemble check-valve filters on small capacity nozzles to avoid clogging and enhance their performance.

AEAir capacity, inletNcm/minHEHeightmmRARadiusmm
AUAir flow, outletNcm/minLFHose lenghtmRFFemale threadinch
CCartridge ident colorLPMax operating pressurebarRFSInlet thread steaminch
CAInternal volumeliterLQMax capacitylpmRFWInlet thread waterinch
DEDepthmmLTMax operation temperature°CRGMale threadinch
DINipple inner dia (hose reels)mmMWire net mesh sizemeshSThicknessmm
D,D1DiametermmMFFlexible hose sizeinchSVSwivel base model
DXNipple inner diametermmPDepthmmUOutlet thread sizeinch
EInlet thread sizeinchPDPipe external diametermmUFOutlet fem thread sizeinch
FFFlange nominal diainchPSPipe sizeinchWWeightkg
H,H1HeightmmQCapacitylpmWFWater inletinch
  WSWrench sizemm

To figure out mesh sizes one has to count the number of openings from the centre of any one wire to the centre of a parallel wire one inch away. The number of openings in a filter cartridge is the mesh size. We highly recommend to add filters to small capacity nozzles to hold fine particulate matter. Please refer to the table below.

+39 0383 344611

Table for body materials: AISI 303 s.s., AISI 316L s.s., Brass

Table for body materials: Nylon

Table for body materials: AISI 303 s.s., AISI 316L s.s., Brass

Table for body materials: Nylon

VED
Filters

www.pnr.eu
info@pnr.it
+39 0383 344611

VED – CHECK-VALVE FILTERS

VED series check-valve filters are specially designed for 3/8″ flanged nozzles. VED filters contain a one-way ball valve to avoid dripping when spray is turned off. They also serve to protect the nozzle tips. We recommend to assemble check-valve filters on small capacity nozzles to avoid clogging and enhance their performance.

Materials
Body:
AISI 303 s.s.
AISI 316L s.s.
Brass
Nylon
Wire net:
AISI 304 s.s.

Mesh number – Free passage
50 mesh = 0,30 mm
80 mesh = 0,18 mm
100 mesh = 0,15 mm

Table for body materials: AISI 303 s.s., AISI 316L s.s., Brass

Table for body materials: Nylon

PNR Italia 27058 Voghera (PV) Italy – Via Gandini 2
Phone: +39 0383 344611 Fax: +39 0383 212489 E-mail: info@pnr.it